Superwind 350 12V, Руководство пользователя

Страница: 12 / 79

V 01-2017
www.superwind.com
11
Ensure that all batteries are disconnected from the system prior to
conducting any work.
Prevent your wind generator from starting unintentionally (turning in a
direct wind) during mounting by turning off the safety switch or short
circuiting the generator output wires (Red and Black).
Disconnect the battery before INSTALLATION! Short-circuit
the two generator OUTPUT WIRES (Graphic No. 3.1.3)
(
Caution
: Do this only
AFTER
disconnecting the battery!)
and/or loosely tie one blade to the mast without pressure to
prevent the blade from spinning during installation.
Never tie a rotor blade to the mast for long periods of time as
this will distort the aerodynamic design of the blade, resulting
in vibrations during operation which could damage the
generator.
Never approach a spinning rotor.
Never try to stop a spinning rotor by hand.
Never install the wind generator in areas where it can be
easily reached or approached by anyone while walking or
working around the turbine structure.