Superwind 350 12V, Руководство пользователя

Страница: 33 / 79

V 01-2017
www.superwind.com
32
7.4 Rotor
assembly
There are two methods to assemble the rotor of your
Superwind
:
a) The hub is attached to the generator shaft and the rotor blades are fitted to the hub
later.
b) The rotor blades are fitted to the hub first, and then the completed rotor is attached
to the generator.
We recommend method b) since in most cases it is easier to assemble the rotor
completely at a convenient place and take it to the wind generator for attachment
afterwards.
7.4.1 Rotor Blade Hub Assembly
For aerodynamic
reasons the rotor
blades trailing
edges are very thin
and sharp. Use
care when
unpacking the
blades to avoid
injury.
Superwind rotor blades are manufactured as sets of three, balanced by weight
and axial runout. These 3 blades can be fixed to the hub in any order. However,