Supero SuperServer 6024H-8R, Руководство пользователя

Страница: 20 / 124

2-4
S
UPER
S
ERVER 6024H-8R/6024H-i Manual
2-4 Installing the System into a Rack
This section provides information on installing the SuperServer 6024H-8R/
6024H-i into a rack unit. If the 6024H-8R/6024H-i has already been mounted
into a rack, you can skip ahead to Sections 2-5 and 2-6. There are a
variety of rack units on the market, which may mean the assembly proce
dure will differ slightly. The following is a guideline for installing the 6024H-
8R/6024H-i into a rack with the rack rails provided. You should also refer
to the installation instructions that came with the rack unit you are using.
Identifying the Sections of the Rack Rails
You should have received two rack rail assemblies with the SuperServer
6024H-8R/6024H-i. Each of these assemblies consist of two sections: an
inner fixed chassis rail that secures to the 6024H-8R/6024H-i (A) and an
outer fixed rack rail that secures directly to the rack itself (B). All screws
and hardware mentioned in the installation steps should be included in the
hardware kit.
To remove the fixed chassis rail (A), pull it out as far as possible - you
should hear a "click" sound as a locking tab emerges from inside the rail
assembly and locks the inner rail. Then depress the locking tab to pull the
inner rail completely out. Do this for both the left and right side rack rail
assemblies.
Figure 2-1. Identifying the Sections of the Rack Rails
A
B
Locking Tab