Supero SuperServer 6024H-8R, Руководство пользователя

Страница: 22 / 124

2-6
S
UPER
S
ERVER 6024H-8R/6024H-i Manual
Figure 2-3. Assembling the Rack Rails
Installing the Rack Rails:
Determine where you want to place the SuperServer 6024H-8R/6024H-i
in the rack. (See Rack and Server Precautions in Section 2-3.) Position the
fixed rack rail/sliding rail guide assemblies at the desired location in the
rack, keeping the sliding rail guide facing the inside of the rack. Screw the
assembly securely to the rack using the brackets provided. Attach the
other assembly to the other side of the rack, making sure both are at the
exact same height and with the rail guides facing inward (see Figure 2-3).
Installing the Server into the Rack
You should now have rails attached to both the chassis and the rack
unit. The next step is to install the server into the rack. Do this by
lining up the rear of the chassis rails with the front of the rack rails.
Slide the chassis rails into the rack rails, keeping the pressure even on
both sides (you may have to depress the locking tabs when inserting).
See Figure 2-4.
When the server has been pushed completely into the rack, you should
hear the locking tabs "click". Finish by inserting and tightening the
thumbscrews that hold the front of the server to the rack.