Supero SuperServer 6024H-8R, Руководство пользователя

Страница: 50 / 124

5-16
S
UPER
S
ERVER 6024H-8R/6024H-i Manual
Power Fail Header
Connect a cable from your power
supply to the Power Fail header
(JP9) to provide warning of power
supply failure. This warning sig-
n a l i s p a s s e d t h r o u g h t h e
PWR_LED pin to indicate of a
power failure on the chassis. See
the table on the right for pin defini-
tions.
Note: this feature is available with
the 6024H-8R only.
Power Fail
Pin Definitions (JP9)
Pin
Number
1
2
3
4
Definition
P/S 1 Fail Signal
P/S 2 Fail Signal
P/S 3 Fail Signal
Reset (from MB)
Note: This feature is only available
when using redundant Supermicro
power supplies.
SMB Power (I
2
C)
Connector
Connect the SMB power connec-
tor to J32 (located near DIMM slot
#1A) to utilize SMB.
SMB PWR
Pin Definitions (J24)
Pin #
1
2
3
4
5
Definition
Clock
Data
N/A
N/A
N/A
Overheat LED (JOH)
Connect an LED to the JOH header
to provide warning of chassis over-
heating. See the table on the right
for pin definitions.
Pin
Number
1
2
Definition
+5V
OH Active
Overheat LED
Pin Definitions (JOH)
SMB
A S y s t e m M a n a g e m e n t B u s
header is located at J11. Connect
the appropriate cable here to uti-
lize SMB on your system. SMB is
u s e d t o m o n i t o r t h e s t a t u s o f
power supply, the fans and the
system temperature. Power con-
nection (below) is also required.
SMB Header
Pin Definitions (J11)
Pin
Number
1
2
3
4
Definition
Data
Ground
Clock
No Connection