Supero SuperServer 6024H-8R, Руководство пользователя

Страница: 59 / 124

Chapter 6: Advanced Chassis Setup
6-1
Chapter 6
Advanced Chassis Setup
This chapter covers the steps required to install components and perform
maintenance on the SC823S-R500LP/SC823i-550LP chassis. For compo-
nent installation, follow the steps in the order given to eliminate the most
common problems encountered. If some steps are unnecessary, skip ahead
to the step that follows.
Tools Required
The only tool you will need to install components and perform maintenance
is a Philips screwdriver.
6-1 Static-Sensitive Devices
Electricstatic discharge (ESD) can damage electronic components. To prevent
damage to any printed circuit boards (PCBs), it is important to handle them very
carefully. The following measures are generally sufficient to protect your equip-
ment from ESD damage.
Precautions
z
Use a grounded wrist strap designed to prevent static discharge.
z
Touch a grounded metal object before removing any board from its anti-
static bag.
z
Handle a board by its edges only; do not touch its components, periph-
eral chips, memory modules or gold contacts.
z
When handling chips or modules, avoid touching their pins.
z
Put the motherboard, add-on cards and peripherals back into their anti-
static bags when not in use.
z
For grounding purposes, make sure your computer chassis provides ex-
cellent conductivity between the power supply, the case, the mounting
fasteners and the serverboard.
Unpacking
The serverboard is shipped in antistatic packaging to avoid static damage. When
unpacking the board, make sure the person handling it is static protected.