Supero SuperServer 5012B-6, Руководство пользователя

Страница: 53 / 112

Chapter 5: Advanced Motherboard Setup
5-15
Reset Button
The Reset Button is located on
pins 3 and 4 of JF1. This connec-
tor attaches to the hardware reset
s w i t c h o n t h e c o m p u t e r c a s e .
See the table on the right for pin
definitions.
Pin
Number
3
4
Definition
Ground
Reset
Reset Pin
Definitions
(JF1)
Power Button
The Power Button connector is lo-
cated on pins 1 and 2 of JF1. Mo-
mentarily contacting both pins will
power on/off the system. The
user can also configure this but-
ton to function as a suspend but-
ton. (See the Power Button Mode
setting in BIOS.) To turn off the
power when set to suspend mode,
hold down the power button for at
least 4 seconds. See the table on
the right for pin definitions.
P in
Nu mber
1
2
Definition
PW _O N
G rou nd
P ow er Button
P in Definitions
(JF1)
Power Fail Button
The Power Fail Button connection
is located on pins 5 and 6 of JF1.
Refer to the table on the right for
pin definitions.
Power Fail Button
Pin Definitions
(JF 1)
Pin
Number
5
6
Definition
Control
GND
Overheat LED (OH)
Connect an LED to the OH connec-
tion on pins 7 and 8 of JF1 to pro-
vide advanced warning of chassis
overheating. Refer to the table on
the right for pin definitions.
Overheat (OH) LED
Pin Definitions
(JF 1)
Pin
Number
7
8
Definition
+5V
GND