Supero SuperServer 5012B-6, Руководство пользователя

Страница: 46 / 112

5-8
S
UPER
S
ERVER 5012B-6/5012B-E Manual
5-7 Adding PCI Cards
1. 32-bit PCI slot
The P4SBR/P4SBE has five 32-bit, 33 MHz 5V PCI slots available. A riser
card designed specifically for use in a 1U rackmount chassis is included
with your system. This riser card allows an installed PCI card to sit at a
90 degree angle so it can fit inside the chassis. This riser card accom-
modates 32-bit, 33 MHz 5V PCI cards. Figure 5-6 shows the riser card.
2. PCI card installation
Before installing a PCI add-on card, locate the PCI riser card mentioned in
Step 1. Begin by removing the I/O shield for the PCI slot you wish to
populate. Fully seat the PCI card into the riser card and screw it into the
metal retention rail (shown in Figure 2-5). Then, insert the riser card into
the PCI slot on the motherboard, pushing down with your thumbs evenly
on both sides of the card. (See Figure 5-7 for location.) Finish by using
a screw to secure the top of the card shield to the chassis. The I/O
shield protects the motherboard and its components from EMI and aid in
proper ventilation, so make sure there is always a shield covering each
PCI slot.
Figure 5-6. 32-bit, 33 MHz 5V Riser Card