Supero SUPER P6DGH, Руководство пользователя

Страница: 28 / 113

2-1
Chapter 2: Installation
Chapter 2
Installation
2-1 Pentium II Processor Installation
1. Check the Intel-boxed processor kit for the following items: the
processor with the fan/heat sink attached, two black plastic pegs,
two black plastic supports and one power cable.
2. Install the retention mechanism attachment mount under the
motherboard. Do this before mounting the motherboard in the
chassis. Do not screw it too tight. Mount the two black plastic pegs
on the motherboard (Figure 2.1). These pegs will be used to attach
the fan/heat sink supports. Notice that one hole and the base of
one peg are larger than the other hole and peg base. Push each
peg into its hole firmly until you hear it "click" into place.
Figure 2-1. Mounting the Pegs
Retention
Mechanism
Large peg and hole