Supero SUPER P6DGH, Руководство пользователя

Страница: 37 / 113

2-10
SUPER P6DGH User’s Manual
2-4 Mounting the Motherboard in the Chassis
The SUPER P6DGH has standard mounting holes to fit different
types of chassis. Chassis may come with a variety of mounting
fasteners made of metal or plastic. Although a chassis may have
both metal and plastic fasteners, metal fasteners are the most
highly recommended because they ground the system board to the
chassis. Therefore, use as many metal fasteners as possible for
better grounding.
2-5 Connecting Cables and Jumpers
Power Supply Connectors
After you have securely mounted the motherboard to the chassis,
you are ready to connect the cables. The SUPER P6DGH supports
both AT and ATX power, only one of which can be used at a time.*
Please check the power mode jumper settings on page 2-23.
AT Power: Attach the power supply cables to PW1. Do not force the
cables, but make sure they are fully seated. The two black wires on
each power connector for PW1 will sit next to each other when cor-
rectly installed. For heavy power loads, also connect the power
supply to the secondary AT power connector at PW5. See Table 2-
3 for the pin definitions of the main AT power connector and Table
2-4 for the pin definitions of the secondary AT power connector.
ATX Power: Attach the power supply cable to PW2, making sure it
is fully seated. For heavy power loads, also connect the power
supply to the secondary ATX power connector at J36. See Table 2-
5 for the pin definitions of the main ATX power connector and Table
2-6 for the pin definitions of the secondary ATX power connector.
*Note: For heavy-load applications, it is highly recom-
mended that you use both the main AND the secondary
power connectors for either AT or ATX power.