Supero SUPER P6DGH, Руководство пользователя

Страница: 51 / 113

2-24
SUPER P6DGH User’s Manual
I
2
0 Debug LED (Optional)
An optional 7-segment LED display is located at IU48 for I
2
0 debug
purposes.
AT/ATX Power Mode Jumper Settings*
The JATPWR and JP100 jumpers are used to configure the system
for either the AT or ATX power mode. Refer to Table 2-30 for the
power mode settings. See page 2-10 for connecting power cables.
The default setting is for AT power mode. See precautions below.
Table 2-30. JATPWR and JP100 Jumper Settings
Mode JATPWR JP100
ATX
AT
*Note: For heavy-load applications, it is highly recom-
mended that you use both the main AND the secondary
power connectors for either AT or ATX power.
(all on) (off)
(all off) (on)
Note: It is important to verify whether your power supply
is AT or ATX and to set the above jumpers correctly
before you apply power to the system.