Supero SUPER P6DGH, Руководство пользователя

Страница: 88 / 113

BIOS User's Manual
5-14
Hard Disk Power Down Mode
This option specifies the power conserving state that the hard disk drive
enters after the specified period of hard drive inactivity has expired. The
settings are Disabled, Standby or Suspend. Note: The Optimal
default setting for this option is Suspend and the Fail-Safe
default setting is Disabled.
Hard Disk Timeout (Minutes)
This option specifies the length of a period of hard disk drive inactivity.
When this length of time expires, the computer enters the power-
conserving state specified in the Hard Disk Power Down Mode option.
The settings are Disabled and 1 Min through 15 Min in 1 minute
intervals.
Power Saving Type
The settings for this option are Sleep, Stop Clock or Deep Sleep.
Standby/Suspend Timer Unit
This allows you to set the standby timeout and suspend timeout timer unit.
The settings are 32 secs, 4 msecs, 4 min or 4 secs.
Standby Timeout
This option specifies the length of a period of system inactivity while in
the full power-on state. When this length of time expires, the computer
enters the standby power state. The settings are Disabled and 4 Min
through 508 Min in 4 minute intervals.
Suspend Timeout (Minutes)
This option specifies the length of a period of system inactivity while in
standby state. When this length of time expires, the computer enters the
suspend power state. The settings are Disabled and 4 Min through 508
Min in 4 minute intervals.
Slow Clock Ratio
The value of the slow clock ratio indicates the percentage of time the
STPCLK# signal is asserted while in the thermal throttle mode. The
settings are Disabled, 0-12.5%, 12.5-25%, 25-37.5%, 37.5-50%, 50-
62.5%, 62.5-75% or 75-87.5%.
Display Activity
This option specifies if AMIBIOS is to monitor display activity for power
conservation purposes. When this option is set to Monitor and there is