Supero SUPER 370DDE, Руководство пользователя

Страница: 93 / 171

5-13
Chapter 5: The FastTrak 100 RIAD Card (370DDE)
To create a new array, automatically, follow the steps under “Creating
Arrays Automatically” in the following section. Promise recommends
this option for most users.
To manually create an array or define an array as bootable, follow the
steps under “Manually Creating Arrays” on page 5-15. You will need to
manually create an array if you wish to modify block size.
To view drives assigned to arrays, see "Viewing Drive Assignments" on
page 5-15.
To delete an array (but not delete the data cntained on the array),
select "Delete An Array" on page 5-20.
To rebuild a mirrored array, see "Rebuild an Array" on page 5-22.
To riew controller settings, see "Viewing Controller Configuration" on
page 5-23.
Note: After installing the FastTrak100 card and configuring an array
using FastBuild, you shuld FDISK and format the arrayed drive(s) if you
are using new, blank drives.
Creating Arrays Automatically
The Auto Setup <1> selection from the Main Menu can intuitively help
create your disk array. It will assign all available drives appropriate for the
disk array you are creating. After making all selections, use Ctrl-Y to Save
selections. FastBuild will automatically build the array.
Optimize Array For
Select whether you want Performance (RAID 0), Security (RAID 1 or
RAID 0+1), or Capacity (Spanning) under the “Optimize Array for”
setting.
FastBuild (tm) Utility 1.xx (c) 1995-2000 Promise Technology, Inc.
[
Auto Setup Options Menu
]
Optimize Array for: Performance
Typical Application usage: A/V Editing
[ Auto Setup Configuration ]
Mode ................................................ Stripe
Spare
Drive Count ................................... 1
Drives used in Array ................................ 2
Array Disk Capacity ..........................16126
[ Keys Available ]
[
↑
] Up [
↓
] Down [
←
,
→
, Space] Change Option [ESC] Exit [Ctrl-Y] Save