Supero SUPER 370DDE, Руководство пользователя

Страница: 129 / 171

5-49
Chapter 5: The FastTrak 100 RIAD Card (370DDE)
Disable checkbox is checked (the default) to turn off automated
scheduling of synchronization. When unchecked, the Schedul-
ing section will be highlighted (see above).
On Errors section offers four radio button choices for the user to
select what procedure they would like to perform if an Error is
detected during a scheduled Synchronization. There are three
types of errors that FastTrak100 detects — a data mismatch
between the primary and secondary drive, a physical media
error on source or target drive, or a total disk failure. The
options for handling Errors are as follows:
Abort: stops the Synchronization process if an error is
encountered.
Fix: in most cases, FastTrak100 automatically can correct
errors. The method of correction varies depending on the
type of error (see Appendix under Error Correction Methodol-
ogy).
Ignore: FastTrak100 will log the event error and continue the
synchronization process. (Warning: this may result in
mismatched drives under RAID 1 or 0+1). Use this setting if
you want to detect the presence of errors, but do not want to
fix these errors at the time. The user may then decide what
to do about the error(s) detected.
Interactive: By checking this option, a selection window will
appear each time an error is detected asking the user
whether they want to Abort, Fix, or Ignore the error (see
Troubleshooting for more details).
Schedule event drop down box allows scheduling synchronization
by minute, by hour, by day, by week, or by month. If enabled, the
default is By Month. This allows synchronization to take place
during an off-hour when the system is either not in use or not at
peak demand.
Start time designates hr/min/ am/pm
On the designates day of week or by ordinal (1st, 2nd, 3rd....)
selection.