Supermicro SUPERSERVER 6013A-T, Руководство пользователя

Страница: 65 / 126

Chapter 6: Advanced Chassis Setup
6-5
!
Important: Regardless of how many Serial ATA hard
drives are installed, both drive carriers must remain in
the drive bays to maintain proper airflow.
U s e c a u t i o n w h e n w o r k i n g a r o u n d t h e S e r i a l A T A
backplane. Do not touch the backplane with any metal
objects and make sure no ribbon cables touch the
backplane or obstruct the holes, which aid in proper
airflow.
!
2. Installing/removing hot-swap Serial ATA drives
Two Serial ATA drive bays are located in the front of the chassis, making
them easily accessible for installation and removal. These drives are hot-
swappable, meaning they can be installed and removed without powering
down the system. To remove, first push the release button located
beside the drive LEDs, then swing the colored handle fully out and use it
to pull the unit straight out (see Figure 6-4).
Figure 6-4. Removing/Installing Serial ATA Drives