
Chapter 6: Advanced Chassis Setup
6-3
6-3
System Fans
Two 10-cm blower fans provides all the cooling needed for the SuperServer 6013A-
T. Air seals are included under the blower fans and at the chassis cross section,
which separates the drive bay area from the motherboard area of the chassis to
promote better airflow. It is highly important that the air seals are properly
installed and making a good seal in order for the cooling air to circulate properly
through the chassis.
System Fan Failure
The blower fans run at a full 100% rpm. If a fan fails, the ambient air temperature
in the chassis will rise and activate the overheat LED on the control panel. You
will need to power down the system to replace this fan.
Replacing System Cooling Fans
1.
Removing a blower fan
After turning off the power to the system, first remove the chassis cover
and unplug the fan cable from the motherboard. Unscrew the failed
blower fan from the chassis and pull it completely out from the
motherboard.
2.
Installing a new blower fan
Replace the failed fan with an identical 10-cm, 12 volt fan (available from
Supermicro, FAN-038). Position the new fan in its proper place and
secure it to the chassis with the screws you removed previously. After
the new fan has been installed, plug the fan cable back into the same
chassis fan header on the motherboard you removed it from. Make sure
the air seal under the fan is properly installed and creating a good seal.
Power up the system and check that the fan is working properly and that
the overheat LED on the control panel has turned off. Finish by replacing the
top panel of the chassis.
cabling out of the airflow path. The LEDs inform you of system status. See
Chapter 3 for details on the LEDs and the control panel buttons. Details on
JF2 can be found in Chapter 5.
Содержание SUPERSERVER 6013A-T
