Supermicro SUPERSERVER 6013A-T Скачать руководство пользователя страница 121

Страница: 121 / 126

Appendix C: Software Installation

C-19

C-2 Installing the ICH5 Driver

1. Insert Supermicro's bootable CD that came with the system into the CD-

ROM drive during system reboot, and the "Super Micro Driver Diskette

Maker" screen will appear.

2. From the list, choose "Intel ICH5R Driver by 3rd Party (Adaptec)" and

press <Enter>.

3. From the next screen displayed, choose the OS driver you want to install

and press <Enter>.

4. Insert a formatted diskette into drive A and press <Enter> as prompted.

5. Exit the program after the process is complete.

6. Insert the Microsoft Windows OS Setup CD in the CD-ROM drive and

reboot the system. The system will start to boot up from the CD.

7. Press the <F6> key when the message "Press F6 if you need to install a

third party SCSI or RAID driver" is displayed.

8. When the Windows OS Setup screen appears, press "S" to specify

additional device(s).

9. Insert the "Adaptec Embedded Serial ATA Raid Controller Driver" diskette

into Drive A and press the <Enter> key.

10. Choose "Adaptec Embedded Host Serial ATA Raid Controller" from the

list and press the <Enter> key.

11. Press the <Enter> key to continue the installation process. (If you need

to specify any additional devices to be installed, do so at this time.) Once

all devices are specified, press the <Enter> key to continue with the instal-

lation.

12. From the Windows OS Setup screen, press the <Enter> key. The OS

Setup will automatically load all device files and then continue installing the

Windows OS.

13. After the Windows OS installation is complete, the system will automati-

cally reboot.

Содержание SUPERSERVER 6013A-T































































































































Результаты поиска

Содержание SUPERSERVER 6013A-T

Отзывы:

Бренды по названию

Популярные бренды

Supermicro SUPERSERVER 6013A-T, Руководство пользователя

Результаты поиска

Содержание SUPERSERVER 6013A-T

Отзывы:

Бренды по названию

Популярные бренды