Supermicro SUPERSERVER 6013A-T, Руководство пользователя

Страница: 44 / 126

5-6
S
UPER
S
ERVER 6013A-T User's Manual
7. Lift the lever on the CPU socket:
lift the lever completely or you will
damage the CPU socket when power
is applied . (Install CPU#1 first.)
Socket lever
8. Install the CPU in the socket. Make
sure that pin 1 of the CPU is seated
on pin 1 of the socket (both corners
are marked). When using only one
CPU, install it into CPU socket #1
(CPU socket #2 is automatically dis-
abled if only one CPU is used).
Pin 1
9. Press the lever down until you
hear it *click* into the locked posi-
tion.
5. On the front side of the motherboard,
place a retention bracket on top of the
C P U s o c k e t . L i n e u p t h e b r a c k e t ' s
mounting holes with those on the moth-
erboard. Secure the retention bracket
to the retention plate (on the back) with
the screws provided. Repeat this step
for the second retention bracket.
6. Repeat Steps 2-5 to install the second CPU Retention plate and brackets
to the CPU#2 socket.
Mounting holes
CPU Socket
10. Apply the proper amount of thermal compound to the CPU die and place
the heatsink on top of the CPU. Make sure the heatsink sits completely flat
on the CPU - if not completely flat, the space between the two will degrade
the heat dissipation function of the heatsink, which may cause the proces-
sor to overheat.
11. Secure the heatsink by locking the retention clips into position. When
correctly installed, the clips should *click* into place and the three black
tabs on the CPU retention pieces should protrude fully through the corre-
sponding holes on the retention clips. See Figures 5-4a and 5-4b for dia-
grams of the retention clips and the heatsink installation procedure.