Supermicro AOC-USAS2-L8e, Руководство пользователя

Страница: 95 / 110

9-5
Chapter 9: MegaRAID Window and Menus
Help Menu
On the H
ELP
menu you can select H
ELP
J
H
ELP
to view the MegaRAID Storage
Manager software online help file. You can select H
ELP
J
A
BOUT
to view version
information for the MegaRAID Storage Manager software.
9-3 Creating a New Storage Configuration
You may use MegaRAID Storage Manager software to also create and modify virtual
drive configurations. The RAID 0, RAID 1 and RAID 10 storage configurations are
supported using this software.
To open the MegaRAID Storage Manager Configuration Wizard, select a controller in
the left P
HYSICAL
/L
OGICAL
V
IEW
panel of the M
EGA
RAID S
TORAGE
M
ANAGER
window.
Then select O
PERATIONS
J
C
REATE
V
IRTUAL
D
RIVE
.
This brings up the Configuration Wizard’s
Create Virtual Drive–Choose Mode
screen ( Figure 9-2 ).
NOTE: When you use the MegaRAID Storage Manager software online help,
you may see a warning message that Internet Explorer has restricted the file
from showing active content. If this warning appears, click on the active content
warning bar and enable the active content.
WARNING: It is recommended that you do not use both SAS and SATA drives in
the same array. Using different drive interfaces in this way could cause
unpredictable behavior, decreased performance, an increased error count, and
decreased MTBF.
NOTE: You cannot create or modify a storage configuration unless you are
logged on with administrator privileges.