manualshive.com logo in svg

Supermicro AOC-USAS2-L8e, Руководство пользователя

Поделиться
Скачать
Supermicro AOC-USAS2-L8e Скачать руководство пользователя страница 52

AOC-USAS2-L8i/L8e Add-on Card User’s Manual

6-4

For more information, see the description of the IOC configuration pages in Chapter 
14 of the Fusion MPT 2.0 MPI Specification Guide.

•

SAS2IRCU does not allow you to create an Integrated RAID volume that combines 
SAS and SATA HDDs.

•

SAS2IRCU does not allow you to create an Integrated RAID volume that combines 
SSDs (solid-state drives) and hard disk drives.

•

SAS2IRCU does allow you to use both SATA and SAS solid-state drives in a single 
Integrated RAID volume, if the Integrated RAID firmware supports it. 

Support for such a mixing is specified by values in static fields in Manufacturing 
Page 4 in the MPI2 specification and is specific for SSD drives only.

Command Line

sas2ircu

 <controller #> 

create

 <volume type> <size> 

{<enclosure:bay>} [VolumeName] [

noprompt

]

Parameters

•

<controller #> – The index of the controller for the newly-created volume.

•

<volume type> – Volume type for the new volume. Valid values are RAID0, RAID1, 
RAID10, or RAID1E.

•

<size> – Size of the RAID volume in Mbytes, or MAX for the maximum size 
available.

•

<enclosure:bay> - The enclosure:bay value of the disk drive for the new RAID 
volume.You can get these values from the output of the DISPLAY command. DOS 
does not support addressing by enclosure:bay.

•

VolumeName – A user-specified string to identify the volume.

•

noprompt

 – This optional parameter prevents warnings and prompts from appearing 

while the command is running.

Program Return Value

0x00 

SUCCESS: Command completed successfully.

0x01 

FAILURE: Bad command-line arguments or operational failure.

0x02 

ADAPTER_NOT_FOUND: Cannot find specified adapter.

DELETE Command

The DELETE command deletes all Integrated RAID volumes and hot spare drives from 
the specified LSI SAS2 controller. No other controller configuration parameters are 
changed.

Command Line

sas2ircu

 <controller #> delete [

noprompt

]

Содержание AOC-USAS2-L8e















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды