Supermicro AOC-USAS2-L8e, Руководство пользователя

Страница: 79 / 110

7-17
Chapter 7: SAS2 BIOS Configuration Utility
The SAS2 BIOS Configuration Utility pauses while it configures the global hot
spares.
Deleting Hot Spare Disks
Follow these steps to delete a global hot spare disk:
1. Access the Manage Hot Spares screen by following step 1 through step 5 of
"Creating Hot Spare Disks" .
2. Select the disk that you no longer wish to use as a hot spare, and press C .
3. Select S
AVE CHANGES
then exit this menu to commit the changes.
The configuration utility pauses while it removes the global hot spare.
7-7 Other Configuration Tasks
This section explains how to perform other configuration and maintenance tasks for
mirrored volumes.
Viewing Volume Properties
Follow these steps to view the RAID properties of the mirrored volume(s):
1. In the SAS2 BIOS Configuration Utility, select an SAS2 adapter from the A
DAPTER
L
IST
screen (see Figure 7-1 ).
The A
DAPTER
P
ROPERTIES
screen appears (see Figure 7-2 ).
2. Select RAID P
ROPERTIES
.
The S
ELECT
N
EW
V
OLUME
T
YPE
screen appears (see Figure 7-3 ).
3. Select V
IEW
E
XISTING
V
OLUME
.
The V
IEW
V
OLUME
screen (see Figure 7-6 ) appears, showing information about the
volume and each disk in it. The screen includes hot spare information, if you have
created global hot spare disks.
4. If the currently displayed volume is not the one you want, press Alt+N to view
another volume on the adapter.
Changing Properties
To change volume and device properties, use the Advanced Adapter Properties to
change device and timing properties for your volume and its drives.
NOTE: If you create one volume using SAS disks, another volume using SATA
disks, and global hot spare disks, the hot spare disks only appear when you
view the mirrored volume that uses the same type of disks as the hot spare
disks.