manualshive.com logo in svg

Supermicro AOC-USAS2-L8e, Руководство пользователя

Поделиться
Скачать
Supermicro AOC-USAS2-L8e Скачать руководство пользователя страница 31

4-9

Chapter 4: Integrated Mirroring and Integrated Mirroring Enhanced

Creating an Integrated Mirroring Enhanced or Integrated 
Mirroring and Striping Volume

Integrated Mirroring Enhanced volumes can have from three-to-ten physical disks. Data 
is written to a disk and mirrored on an adjacent disk. Integrated Mirroring and Striping 
volumes can have a minimum of four and a maximum of ten physical disks, in even 
numbers. In an Integrated Mirroring Enhanced or Integrated Mirroring and Striping 
volume, the data is both mirrored and striped.

Follow these steps to create an Integrated Mirroring Enhanced (RAID 1E) or Integrated 
Mirroring and Striping (RAID 10) volume with the SAS2 BIOS Configuration Utility. 

1.

On the A

DAPTER

 L

IST

 window, use the arrow keys to select a SAS adapter and then 

press E

NTER

.

The A

DAPTER

 P

ROPERTIES

 window appears.

2.

Use the arrow keys to select RAID P

ROPERTIES

, and then press E

NTER

.

The C

REATE

 A

RRAY

 window appears.

3.

Select C

REATE

 RAID 1E V

OLUME

.

The C

REATE

 N

EW

 A

RRAY

 window appears.

4.

Move the cursor to the RAID D

ISK

 column and select a line that has a 

No

 entry in 

this column, indicating that the disk is not already part of the volume being created. 
To add the disk to the new array, change the 

No

 to 

Yes

 by pressing the space bar.

5.

Move the cursor to another line and press the space bar to add another disk to the 
array.

If you select an odd number of disks, the SAS2 BIOS Configuration Utility creates 
an Integrated Mirroring Enhanced array. If you select an even number of disks, it 
creates an Integrated Mirroring and Striping array. As you add disks, the A

RRAY

 S

IZE

 

field changes to reflect the size of the new array.

6.

Press 

C

 to create the array.

A menu screen appears.

7.

From the menu options, select S

AVE

 

CHANGES

 then exit this menu.

A Processing message appears briefly, and then the SAS2 BIOS Configuration 
Utility returns to the A

DAPTER

 P

ROPERTIES

 window. Initialization of the new array 

continues in the background.

NOTE: 

To create a second Integrated Mirroring Enhanced or Integrated 

Mirroring and Striping volume, repeat the instructions above.

Содержание AOC-USAS2-L8e















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды