manualshive.com logo in svg

Supermicro AOC-USAS2-L8e, Руководство пользователя

Поделиться
Скачать
Supermicro AOC-USAS2-L8e Скачать руководство пользователя страница 88

AOC-USAS2-L8i/L8e Add-on Card User’s Manual

8-2

8-2

Hardware and Software Requirements

The hardware requirements for MegaRAID Storage Manager software are as follows:

•

PC-compatible computer with an IA-32 (32-bit) Intel Architecture processor or an 
EM64T (64-bit) processor and at least 128 Mbytes of system memory (256 Mbytes 
recommended)

•

Hard disk drive with at least 50 Mbytes available free space

The supported operating systems for the MegaRAID Storage Manager software are as 
follows:

•

Microsoft Windows 2000, Microsoft Windows Server 2003, Microsoft Windows XP, 
Microsoft Vista and Microsoft Windows Server 2008.

•

Red Hat Linux 3.0 or 4.0

•

SUSE SLES 9, with latest updates and service packs

Refer to your server documentation and to the operating system documentation for 
more information on hardware and operating system requirements.

8-3

Installing for Windows

Follow these steps if you need to install MegaRAID Storage Manager software on a 
system running Microsoft Windows 2000, Microsoft Windows Server 2003, or Microsoft 
Windows XP:

1.

Insert the MegaRAID Storage Manager software installation CD in the CD-ROM 
drive. 

If necessary, find and double-click the 

setup.exe

 file to start the installation program.

2.

When the W

ELCOME

 screen appears, click N

EXT

. 

If MegaRAID Storage Manager software is already installed on this system, the 
P

ROGRAM

 M

AINTENANCE

 screen appears. Read the screen text and select M

ODIFY

, 

R

EPAIR

, or R

EMOVE

.

3.

When the next screen appears, read and accept the user license, and click N

EXT

. 

The C

USTOMER

 I

NFORMATION

 screen appears.

4.

Enter your user name and organization name, and in the bottom part of the screen, 
select an installation option:

•

If you select A

LL

 

USERS

, any user with administrative privileges can use this ver-

sion of MegaRAID Storage Manager software to view or change storage config-
urations.

•

If you select O

NLY

 

FOR

 

CURRENT

 

USER

, the MegaRAID Storage Manager short-

cuts and associates icon availability to only the user with this screen’s user 
name.

Click N

EXT

 to continue. 

Содержание AOC-USAS2-L8e















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды