manualshive.com logo in svg

Supermicro AOC-USAS2-L8e, Руководство пользователя

Поделиться
Скачать
Supermicro AOC-USAS2-L8e Скачать руководство пользователя страница 90

AOC-USAS2-L8i/L8e Add-on Card User’s Manual

8-4

If you select C

LIENT

 installation for a PC used to monitor servers, and if there are no 

available servers with a registered framework on the local subnet (that is, servers with a 
complete installation of MegaRAID Storage Manager software), you cannot connect to a 
remote server unless you first edit the 

startupui.sh

 file. Specifically, you must add the IP 

address of the remote server to the end of the 

startupui.sh

 file.

For example, to connect to a remote framework on server 192.168.0.10, add the IP 
address to startupui.sh as shown in this example: 

start JRE\bin\javaw -classpath .;GUI.jar 

GUI.VivaldiStartupDialog ajsgyqkj=71244 192.168.0.10

Be sure to include a space in front of the IP address, as shown in the above example.

Linux Error Messages

One or more of the following messages may appear while you are installing MegaRAID 
Storage Manager software on a Linux system:

•

More than one copy of MegaRAID Storage Manager software has 

been installed. 

This message indicates that the user has installed more than one copy of 
MegaRAID Storage Manager software. (This can be done by using the rpm-force 
command to install the rpm file directly, which is not recommended, instead of using 
the

 install.sh

 file.) In such cases, the user must uninstall all the rpm files manually 

before installing MegaRAID Storage Manager software with the procedure listed 
previously.

•

The version is already installed.

This message indicates that the version of MegaRAID Storage Manager software 
you are trying to install is already installed on the system.

•

The installed version is newer.

This message indicates that a version of MegaRAID Storage Manager software is 
already installed on the system, and it is a newer version than the version you are 
trying to install.

•

Exiting installation.

This is the message that appears when the installation is complete.

•

RPM installation failed.

This message indicates that the installation failed for some reason. Additional 
message text explains the cause of the failure.

Содержание AOC-USAS2-L8e















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды