Supermicro AOC-USAS2-L8e, Руководство пользователя

Страница: 53 / 110

6-5
Chapter 6: Using the Configuration Utility
Parameters
• <controller #> – The index of the controller with the volume(s) that you want to
delete.
• noprompt – This optional parameter prevents warnings and prompts from appearing
while the command is running.
Program Return Value
0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command-line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.
DISPLAY Command
The DISPLAY command displays information about LSI SAS2 controller configurations,
including controller type, firmware version, BIOS version, volume information, physical
drive information, and enclosure. See the following Sample Output example.
The physical device information section displays the duplicate device of a dual ported
SAS drive.
Command Line
sas2ircu <controller #> display [filename]
Parameters
• <controller #> – The index of the controller for which you want to display
information.
• [filename] – An optional valid filename to store the command output to a file.
Program Return Value
0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command-line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.
NOTE: One MB is 1,048,576 bytes. The command rounds all amounts stated in
MB down to the nearest MB.