manualshive.com logo in svg

Supermicro AOC-USAS2-L8e, Руководство пользователя

Поделиться
Скачать
Supermicro AOC-USAS2-L8e Скачать руководство пользователя страница 20

AOC-USAS2-L8i/L8e Add-on Card User’s Manual

3-2

LSI MegaRAID iMR/IR Firmware Flash Process

Use the following procedures for flashing firmware between iMR mode and IR mode.

Flashing IR mode to iMR mode

1.

Please copy all files to bootable USB disk

2.

Run chkir.bat and if the Device ID is 0x72, the is IR mode need update to iMR

3.

Run chksas.bat (Write down the SAS address)

4.

Run upimrsbr.bat (the Device ID will change to 0x73; it's iMR mode)

5.

Turn off the system and insert the RAID Key: AOC-SAS2-RAID5-KEY

6.

Restart the system

7.

Run up2imr.bat

8.

Reboot the system

9.

Run setsas.bat (Use the SAS address from step#2)

10. Reboot the system

Flashing iMR mode to IR mode

1.

Run chkimr.bat and if the Device Id is 0x73 (It's in iMR mode)

2.

Run chkadd.bat and find SAS address in the adpinfo.txt (This process will take 
some time)

3.

Run upirsbr.bat (the Device ID will change to 0x72; it's IR mode)

4.

Turn off the system and unplug the RAID Key: AOC-SAS2-RAID5-KEY

5.

Restart the system

6.

Run up2ir.bat

7.

Run upsadd.bat with 16 byte SAS address (Please use the SAS address saved in 
the adpinfo.txt from step#2)

8.

Reboot the system

3-3

Downloading RAID Mode Drivers

To obtain drivers go to the SuperMicro FTP site and down the appropriate driver for the 
operating system you are using. 

The drivers can be found at the following FTP site:

ftp://ftp.supermicro.com/driver/SAS/LSI/2008/

See the installation text file within each download for details on the installation of these 
drivers.

Содержание AOC-USAS2-L8e















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды