User Manual
61
Selecting mode
Modifying mode
Press
/ to move to the desired item.
Press
ENT
and the first digit of the
value to be set flashes.
Press
/ to set the value and
Press
ENT
/
ESC
to move the cursor.
Press
ENT
if the whole value is OK and
the will move back to the item name.
Repeat the steps above for the
settings of the other items.
Press
ESC
to quit the menu and a
prompt will appear.
Press
ENT
to save and apply the setting.
To discard the setting,
Press
ESC
.
Press
ENT
to enter the menu.
Press
/ to navigate through
the menu.
Press
ENT
to confirm a selection.
Press
/ to move
to the desired item.
Press
ENT
to confirm.
Sub-parameters
to be set?
End
Start
No
Yes
(modifying)
Yes
(selecting)
Fig. 7-1
Button Operations
7.3 Powering on the System
If all the items mentioned in section
are OK, proceed as follows to start the
inverter for the first time.
1.
Rotate the DC switch to “ON”. The DC switch may be integrated in the
inverter or installed by the customer.
2.
Connect the AC switch between the inverter and the grid if applicable.
3.
Connect the DC switch between the inverter and the PV string if
applicable.
4.
Connect the external DC circuit breaker between the inverter and the
battery pack if a battery is equipped.
5.
(Optional)
Power on the battery manually if applicable.
6.
The LCD screen will be activated 5s later and enter the initial settings.
