60
Serial Parallel Controller User’s Guide—February 1993
A
4. Type the number of the OS version that you need to install, then Press
Return
.
•
Select
1
if you have a single-processor desktop system running SunOS 4.1 or
later.
•
Select
2
if you have a multiprocessor system.
Your selection is displayed.
5. Decide whether to proceed with configuration at this time.
•
To run the configuration script now, type
yes
and press
Return
.
•
To run the configuration script manually at a later time, type
no
. (Your
software will be installed, but not configured. Press
Return.
The following messages appear.
6. When you are finished reviewing the menu, type
y
and press
Return
.
Your system is ready for operation (you do not need to reboot).
Which ONE of the following would you like to install:
arch SunOS version
1. sun4c / SunOS 4.1, 4.1.1, or 4.1.2
2. sun4m / SunOS 4.1.1_PSR, 4.1.2
3. sun4c / SunOS 4.0.3c
Note for SunOS 4.0.3c installation:
While there is software in this release that will run on a
SunOS 4.0.3c system, this software is NOT OFFICIALLY SUPPORTED.
Enter either 1, 2 or 3 [1]:
Configuration is for sun4c / SunOS 4.x
Would you like to run the configuration script? If you answer Yes
then the software will automatically be configured to allow you to
use your new SPC/S right away. If you answer No, you will have to
manually run the configuration script at some time in the future.
Run the configuration script? [yes]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com