36
Serial Parallel Controller User’s Guide—February 1993
5
After you see the
connected
message, set up your modem by typing
commands in the
tip
window. For information about which commands to
type, refer to your System & Network Administration manual. After setting up
your modem, type
~.
and press
Return
to exit the
tip
window.
You need to edit additional files to set up the
tty
ports for the device driver, to
enable logins on your modem(s).
Add the following line(s) to the
/etc/ttytab
file:
Note – Add lines to this file only if they connect a modem that answers the
telephone to provide a login.
You also need to edit files to set up the UNIX to UNIX File Copy (UUCP)
package installed on your system. UUCP allows your system to communicate
with other systems using the modem. Refer to the system administration manual
for your system for information about setting up UUCP files for the modem.
tutorial% tip ttyz
n
connected
n is the number of the port to test.
tutorial# ~.
tutorial#
ttyy00
"/usr/etc/getty
D2400"
dialup
on
remote
ttyy01
"/usr/etc/getty
D2400"
dialup
off
remote
ttyy02
"/usr/etc/getty
D2400"
dialup
off
remote
ttyy03
"/usr/etc/getty
D2400"
dialup
off
remote
ttyy04
"/usr/etc/getty
D2400"
dialup
off
remote
ttyy05
"/usr/etc/getty
D2400"
dialup
off
remote
ttyy06
"/usr/etc/getty
D2400"
dialup
off
remote
ttyy07
"/usr/etc/getty
D2400"
dialup
off
remote
Turn input
on
for each port you wish to log into.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com