Starting the domain - Example
Sun Confidential: Internal Only
97
SunService Sun Microsystems, Inc. All Rights Reserved. Enterprise Services
{/N0/SB4/P1} Subtest: Fireplane Bus Saturation Test
{/N0/SB4/P1} Subtest: MP Memory Clear Test
{/N0/SB4/P1} CORE 16 clearing 00000000.00000000 to 00000002.00000000
{/N0/SB4/P1} CORE 17 clearing 00000002.00000000 to 00000004.00000000
{/N0/SB4/P1} Running Domain Stick Sync Tests
{/N0/SB4/P1} Subtest: Sync. Stick Registers Test
{/N0/SB4/P1} Running Domain Verify Stick Sync Tests
{/N0/SB4/P1} Subtest: Verify Sync. Stick Registers Test
{/N0/SB4/P0} DCB_DECOMP_OBP command succeeded
{/N0/SB4/P0} iobd 8 bdtype 1
{/N0/SB4/P0} Decompress OBP done
{/N0/SB4/P0} DCB_ENTER_OBP command succeeded
{/N0/SB4/P1} DCB_ENTER_OBP command succeeded
Entering OBP ...
Sun Fire 6800
OpenFirmware version 5.16.0 (12/24/03 09:54)
Copyright 2001-2004 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
SmartFirmware, Copyright (C) 1996-2001. All rights reserved.
16384 MB memory installed, Serial #50804601.
Ethernet address 0:3:ba:7:37:79, Host ID: 83073779.
ERROR: Can’t open boot-device
{10} ok
Note –
Get into the habit of doing a
show-post-results
and a
probe-scsi-all.
printenv
and
devalias
will also help you troubleshoot the above
error.
show-post-results & probe-scsi-all
{10} ok show-post-results
Board 4, Type: CPU/Memory
port 16 - Status = Pass, Type: CPU/Memory
E-cache: 8 MB R-freq: 900 MHz A-freq: 900 MHz
port 17 - Status = Pass, Type: CPU/Memory
E-cache: 8 MB R-freq: 900 MHz A-freq: 900 MHz
port 18 - Status = On blacklist, Type: CPU/Memory
agent status = On blacklist
N0/SB4/P2/B0/L0 On blacklist