Sun Microsystems 5220, Руководство по началу работы

Страница: 43 / 100

Chapter 2 Installing the Appliance and Back-End Storage 31
2. Attach a mounting bracket to the right side of the appliance chassis.
a. Position the mounting bracket against the appliance chassis (
FIGURE 2-15
) so that
the bracket’s slide rail lock is at the front and its three keyed openings align
with the three locating pins on the side of the chassis.
FIGURE 2-15
Attaching a Mounting Bracket to the Chassis
b. With the three pins protruding though the openings in the mounting bracket,
pull the bracket toward the front of the chassis until it locks into place with an
audible click.
c. Verify that the three pins are trapped in their openings and that the back pin
has engaged the mounting bracket lock, as shown in
FIGURE 2-15
.
3. Attach the second mounting bracket to the left side of the appliance chassis.
4. On the rack posts, determine which hole numbers to use for the slide rails. The
appliance requires one rack unit (1U).
5. Determine which screws to use to mount the slide rails.
■
If the rack posts have threaded holes, determine whether the threads are metric or
standard and use the appropriate screws from the mounting kit.