Sun Microsystems 5220, Руководство по началу работы

Страница: 26 / 100

14 Sun StorageTek 5220 NAS Appliance Getting Started Guide • October 2006
■
Use a minimum 14 A WG connected to the earth ground stud on the back of the
appliance.
■
Connect the safety ground conductor to the chassis stud with a two-hole crimp
terminal with a maximum width of 0.25 inch.
■
Install the nuts on the chassis with a 10 in/lb torque.
Review specifications in Appendix A to determine isolation and continuous power
requirements.
Checking the Slide Rail Kit
When you unpack the shipping box, verify that you have all of the parts:
■
Two slide rail assemblies, one for installing on the right side of the rack and one
for the left. Each slide rail assembly has two parts:
■
Slide rail that attaches to the rack posts
■
Mounting brackets that attach to the appliance chassis
■
Package of screws and nuts in assorted sizes to fit various types of racks and
cabinets
■
Cable management arm with six preinstalled cable clips
■
Manufacturer’s instruction sheet for the cable management arm
Checking the Universal Rail Kit
When you unpack the shipping box, verify that you have all the parts:
■
Two cabinet rail adapter plates (used for unthreaded cabinet rails only)
■
Mounting hardware as listed below:
Type Quantity Use
10-32 panhead screw 8 Assemble main and extender sections of left and
right rails (Typically, left and right rails are
shipped pre-assembled)
10-32 panhead screw 4 Mount left and right rails to front of cabinet rails
Metric M6 panhead screw 4 Mount left and right rails to back of cabinet rails
Metric M6 panhead screw 4 Secure front of tray to left and right cabinet rails
6-32 flathead screw 2 Secure back of tray to left and right side rails