Sumitomo Drive Technologies JVOP-182-H, Руководство по установке

Страница: 23 / 31

6 Basic Operation
23
The following procedure is used to read parameters from the unit.
Note: 1. Set parameter o3-02 (Read Allowable) to 1 (Enable) to read the parameter settings from the unit. Set
parameter o3-02 to 0 (Disable) to protect the parameter settings in the option.
Step Display/Result
1. Turn on the power to the unit. The initial display appears.
2. Press ･ to select the Parameter Setting and
Press .
3. Press ･ ･ to select o3-01 (Copy Function
Selection) and press .
4. Press
･
to select 01.
5. Press and the option will read parameter settings from the unit.
6. Automatically return to the Copy Function Selection display.
7. Press repeatedly until the display returns to the initial display.
ALM
REV DRV FOUT
DIGITAL OPERATOR JVOP-182
DRV
ALM
REV DRV FOUT
DIGITAL OPERATOR JVOP-182
DRV