Sumitomo Drive Technologies JVOP-182-H, Руководство по установке

Страница: 11 / 31

3 Receiving
11
Table 2 Item Names and Part Numbers (Sold Separately)
◆
Tool Requirements
Screwdriver (M3) is required to install the option on an enclosure panel door.
Item
<1> Digital Operator Cable: Used to connect the digital operator to the drive (sold separately).
<2> To connect the option to SF-520, install the RS-232C Interface Option to the unit.
Yaskawa Part Number Notes Page
RS-232C Interface Option
SI-232/J-H
<2>
21
Digital Operator Cable 1 m (3 ft.)
<1>
ICS-1
Alternate cables (customer-
supplied), RJ45 8-pin Straight
Connector UTP Cat5e cable
20
Digital Operator Cable 3 m (10 ft.)
<1>
ICS-3
Alternate cables (customer-
supplied), RJ45 8-pin Straight
Connector UTP Cat5e cable
20
SF-520