Sumitomo Drive Technologies JVOP-182-H, Руководство по установке

Страница: 19 / 31

5 Installation Procedure
19
◆
Installing the Option
NOTICE: Prevent foreign matter such as metal shavings or wire clippings from falling into the unit during
installation and project construction. Failure to comply could result in damage to the unit. Place a temporary
cover over the top of the unit during installation. Remove the temporary cover before startup, as the cover
will reduce ventilation and cause the unit to overheat.
1.
Cut an opening in the enclosure panel for the option according to Figure 6 .
2.
Position the option so the LED display faces outwards, and mount it to the
enclosure panel as shown in
Figure 6 .
Figure 6
Figure 6 External/Face-mount Installation
Figure 7
Figure 7 Panel Cut-out Dimensions (External/Face-mount Installation)
Option
M3 × 6 (0.24)
Phillips recessed
pan head machine screw × 2
Enclosure panel
Unit: mm (in.)
22 (0.87)
22(0.87)
14
(0.55) Unit : mm (in.)
26
(1.02)
22
(0.87)
78 (3.07)
2 (0.08)