Sugon TC6600, Руководство пользователя

Страница: 8 / 141

viii
Operate in the interior of power-on server.
[Warning]
When the server is powered on, the static electricity discharged into the internal components of the server may
cause the server to abort abnormally, which may cause data loss. To prevent this potential problem, please always
use the ESD wrist strap or other grounding systems when you operate inside the power-on server. The server
(some models) supports the hot plug equipment and is designed to operate safely when the server is powered on
and the outer cover is removed. Please observe the following guidelines below when you operateinside the
power-on server.

Prevent from putting on clothes with loose cuffs. Clamp the button on the cuffs of long sleeve shirt before you
operate it in the server internally. Do not wear any cuff links when you operate inside the server.

Do not let tie or scarf down into the server.

Take off all jewelries, such as bracelet, necklace, ring and loose wrist watch.

Take out items in shirt pocket (such as pen and pencil) which may fall into the server when you bend over the
server.

Prevent any metal items (such as paper clip, hair clip and screw) from falling into the server.
Statement 4:
[Note]
In order to reduce the risk of personal injury, fire or equipment damage, the AC power supply branch circuit
powered for the rack shall not be overloaded. Please consult with the electrical agency who formulates the
equipment wiring and installation requirements.
Statement 5:
[Note]
Use the adjustable UPS to prevent the server from being affected by the power fluctuation and temporary power
outage. This equipment can prevent the hardware from being damaged by the impact of surge and peak voltage,
and maintain the system in normal operation state during power failure.
Statement 6:
[Note]
When you use the cable management arm component, each cable shall be kept loose to prevent from damaging
the cable when taking out server from the rack.
Statement 7:
[Note]
To reduce the risk of electric shock or equipment damage, attention shall be paid to the following aspects:

Make sure to use the grounding plug of the power cord. The grounding plug can perform important safety