Sugon TC6600, Руководство пользователя

Страница: 35 / 141

16
example, the power module can provide the 4+2 redundancy when the chassis system is fully
configured with 14 CPU blades.
[Note] The specific redundancy mode shall subject to the actual configuration of the blade
system.

The power module supports the automatic smart regulation function for the regulation
according to the actual power consumption of the system, and allocates the power
consumption to each power modules respectively, so as to ensure the power module operates
at the highest point of the efficiency curve, reduce the unnecessary power loss and increase
the service life of the power module greatly.

Users don't have to set the power module. It can be used normally after connected with the
power correctly. The green indicator will be lit when the power module is in the normal
operation status, and the yellow indicator will be lit when the alarm occurs for the power fault.
The front view of the power module is as shown in
Figure 2-4
.
Figure 2-4Front View of Power Module
2.1.5 Fan Module
The TC6600 blade system provides up to 10 fan modules, and the fan module provides the heat
dissipation support for the whole system.
[Note] Ensure all heat dissipation modules are installed correctly and operate normally.

The fan module supports the linear pre-compensation function, and can implement the linear
smooth adjustment of the fan speed according to the temperature change,so as to reduce the
unnecessary power consumption under the condition that the system heat dissipation is met.
Furthermore, the system will predict temperature change trend at the next stage automatically
according to the temperature change, carry out the speed adjustment and compensation in
advance, so as to ensure the fan speed and smooth noise.

The fan module is managed and regulated by the system automatically, and users don't have
to carry out any operation.
Figure 2-4
is the schematic diagram of the fan module.