Sugon TC6600, Руководство пользователя

Страница: 7 / 141

vii
Dangerous Warning Statement
[ Warning ]
This product is of the grade A product. The product may cause the radio interference in the living environment. In
this case, it may require users take practical measures to prevent the interference.
The current in the power supply, telephone and communication cable is dangerous. In order to eliminate the risk
of electric shock:

Do not connect or disconnect any cable, or install, maintain, or reconfigure this product during the lightning.

Connect all power cords to the power supply socket with the correct wiring and proper grounding.

Connect all equipment which needs to be connected to this product to the socket with the correct wiring.

Connect or disconnect the signal cable by one hand as far as possible.

Do not turn on any equipment when there is signs of fire, flood or house collapse.

Unless otherwise stated during the installation and configuration, disconnect the connected power cord, remote
communication system, network and modem before you open the outer cover of the equipment.
Statement 1 :
[Note]
The power control button on the equipment and the power switch the power supply will not disconnect the current
of the supply equipment. The equipment may be also provided with more than one power cord. To enable the
equipment to be powered off completely, ensure all power cords are disconnected with the power supply.
Statement 2:
[Note]
Do not remove the outer cover of power supply or the outer cover of any component with the following label.
There is dangerous voltage, current and energy level in any component with this label. There is not any
maintainable component in these components. If you suspect some component with any problem, please contact
technical service personnel.
Statement 3:
[Danger]
In some cases, the high branch circuit load may cause the fire and electrical shock hazard. In order to prevent
such risks, ensure that the electrical requirements of the system does not exceed the protection requirements of
the branch circuit. Refer to the accompanying information of the equipment to understand the electrical
specification.