Page 33
5-5
#7040748 - Revision A - September, 2016
MODEL UW-24
MODEL UW-24
Component Removal
Figure 5-6. Wine Rack Assembly Removal
Figure 5-8. Slide, Spacer & Support Spacer
Lift front while pulling forward;
After indentations clear rollers,
lower front, pull forward, lift rear.
Support Spacer
Slides
Screws
Spacer
INTERIOR COSMETIC AND MECHANICAL COMPONENTS
Wine Rack Removal
To remove a wine rack (See Figure 5-6):
1.
Pull wine rack forward until it stops.
2.
Lift front of wine rack up while pulling forward.
3.
After indentations on the wine rack clear the rollers
on the cabinet slides, lower front of wine rack while
continuing to pull forward and lifting rear of wine
rack.
Upper LED Light Removal
The upper LED light is held in the channel of the upper
light bracket. The upper light bracket is then mounted
to the top front of the upper wine section with screws.
To remove the upper LED light, first remove the two
upper wine racks, then (See Figure 5-7):
1.
Extract upper light bracket mounting screws.
2
Lower upper light bracket down and disconnect
LED light electrical leads.
3.
Extract screw securing ground wire to the upper
light bracket.
4.
Remove wire grommet from the light bracket.
4.
Slide LED light out the end of the upper light brack-
et channel.
NOTE:
When reinstalling the LED light and upper light
bracket, the LED should be facing away from the upper
light bracket and all wire leads tucked behind the light
bracket before remounting it to the ceiling.
Cabinet Slide, Slide Spacer and Slide Support
Spacer Removal
Cabinet slides are attached to side walls with screws.
On the handle side of the compartment, a small plastic
spacer, the slide spacer, is between the front of the
slide and the side wall. On the hinge side, a wide plas-
tic support spacer, the slide support spacer, is between
the slide and the wall.
To remove a cabinet slide, first remove the wine racks
in that section, then (See Figure 5-8):
1.
Extract the mounting screws from the cabinet slide.
2.
Pull the slide and slide spacer or slide support
spacer from the wall.
Figure 5-7. Upper LED Light Removal
Slide LED light out end of channel
LED Light
Light Bracket