Studer Vista 9, Руководство по эксплуатации

Страница: 54 / 574

2-4 Desk Operation
2.2.7 Area 6 – Desk scrolling
SCROLL: LOCK BAY
Used to lock the corresponding bay. This prevents this particular bay from
global scrolling and view changes. However, even a locked bay can be
scrolled when using the scroll keys on this particular bay. Global view changes
are also only affecting this particular bay if a
GLOBAL VIEW
key is pressed
on the locked bay. The global view is not changed if a
GLOBAL VIEW
key is
pressed on another bay.
Since software version V3.3, it is possible to create a ‘lock group’ by pressing
and holding this key on two bays at the same time. All bays in between will
then also be part of the lock group. All bays in a lock group will react together
in terms of scrolling and global view changes. In this way it is possible to
operate the desk with multiple operators. Restrictions: Only one gang and
only one pending paste action are available at a time.
SCROLL: SECTION
When activated, pressing the arrow keys will navigate not only by one bay,
but by a whole section (= number of physical faders).
Note: If the
SCROLL: LOCK BAY
and
SCROLL: SECTION
keys are both active, scroll-
ing this bay will make it move to the same position within the next section,
allowing a kind of ‘layered’ operation with ten channels at a time.
Section Indication
Indication of the current position within all sections. Acts similar to a scroll
bar.

Scrolling Arrow Keys
By pressing one of these arrow keys, the desk will move by 10 faders to the
left or right, similar to the scroll keys on a PC.
Vista 9 Digital Mixing System
Date printed: 27.0.0
SW V4.5