Studer Vista 9, Руководство по эксплуатации

Страница: 397 / 574

Vista 9 Digital Mixing System
Au 5-0
Date printed: 28.0.0 SW V4.5
5.14.5 Scene Capture/Recall
A Scene is a global ‘snapshot’ of the automation status of each control within
the system. There are two buffers in which Scenes may be stored. Scenes will
be stored and can recalled during subsequent sessions.
No­te The term ‘snapshot’ is not the same as a Snapshot in the GC. Snapshot in
this regard refers to a picture of the automation status console-wide.
Scene Capture
Holding the
STORE
key and pressing
CAPT
will ‘capture’ a Scene in the first
buffer. Holding the
AUTO MODE
and
STORE
keys and pressing
AUTO MODE
and
CAPT
will ‘capture’ a Scene in the second buffer.
The
RCL
key will illuminate when a Scene has been captured in the first buf-
fer. There is no indication of the status of the second Scene buffer.
The following controls will be stored within a Scene:
• Controls in RECORD
• Controls that are Held
• Controls that are being touched when the Scene is captured
A list of controls and their values will be stored when a Scene is cap-
tured.
No­te
If no controls are in the states listed above, the existing Scene buffer will
remain intact.
Scene Recall
Pressing the
RCL
key will ‘recall’ the Scene stored in the first buffer. Hold-
ing
AUTO MODE
modifier key and pressing the
RCL
key will recall the Scene
stored in the second buffer.
When a Scene is recalled, the controls on the list come back Held and
WRITE Enabled. The values for the controls in the buffer will be reinstated
as well. If Touch Record is active, the controls in the list will punch-in to
RECORD upon Scene Recall
Clearing a Scene Buffer Holding the Global Record
CLR / ALL
key and pressing
CLR / ALL
and
RCL
will ‘clear’ a Scene in the first buffer. Holding Global Record
CLR / ALL
and
AUTO MODE
and pressing
RCL
will clear the second Scene buffer.
No­te The data in the Scene Buffer is not saved as part of a Mix Pass, Mix Tree, or
Title. Therefore, it will
not
persist from session to session.