Studer Vista 9, Руководство по эксплуатации, Страница: 338 / 574

Vista 9 Digital Mixing System
5-44 Au
Date printed: 28.0.0 SW V4.5
The Read Mix (replay value) is roughly indicated by a pink-colored ele-
ment.
- If the control is moved while in TRIM ENABLE (no Touch modes
engaged), the Trim value will be AUDITIONED. The Trim values
will offset the Read Mix Data and the net result will be heard. In other
words, if the control is moved, the audio reflects the sum of the Read
Mix Data plus the offset from the nominal Trim value of the control.
So, if the Read Mix Data had a moving value, you will hear that same
moving value, except it will be offset by the amount that the control
has been moved from the nominal trim value.
- If changes to Trim values have been previously written, faders in
TRIM will normally replay the Read Mix Data (which incorporates
the previous Trim values) and the Trim Replay values will be shown
on the faders and null indicators. Other controls will replay the Read
Mix Data (which incorporates the previous Trim values). Changes to
Trim values will be displayed by the control.
Reco­rd On:
• TRIM RECORD: Everything is the same as with Record Off, except that
the Trim values are written into a new Mix Pass. For all controls, the Trim
offset is combined with the Read Mix data in the new pass. The Trim
Replay data is also modified for faders.
- Previous Trim values are updated (modifying a trim).
- At the end of a pass in which at least one control was in TRIM RE-
CORD, a new Mix Pass is generated that contains the previous Mix
Pass Read data plus the Trim offset. For faders, the newly recorded
Trim Replay Data is generated as well.
No­te
TRIM RECORD is a destructive mode in regard that previously written Trim
data is updated. However, Trim data is never lost because a new Mix Pass is
created at the end of every Trim RECORD pass. All Mix Passes are retained
in the Mix Tree unless purposely deleted.
Co­nditio­ns • If touched and not in RECORD, the control will enter TRIM AUDITION
for the duration of the touch. The control will snap back to its Trim value
upon release.
• With TOUCH RECORD engaged, the control will enter TRIM RECORD
(Punch-in) when touched and return to TRIM ENABLE (Replay) when
released (Punch-out). When released the control will snap back to its Trim
value unless GLIDE is engaged. If glide is engaged the control will glide
back to its Trim value.
• With TOUCH HOLD engaged, the control will enter TRIM AUDITION
mode when touched and holds the audition value when released.
• With TOUCH RECORD and TOUCH HOLD engaged, the control will
enter TRIM RECORD (Punch-in) when touched and stays in TRIM
RECORD when released. The control will stay in TRIM RECORD until
punched out or the Mix Pass has ended.
<Optio­n> • With <Disable Trim Replay> checked on the Misc Options page, the offset
of fader Read Mix Data using Trim Replay Data is defeated and untrimmed
audio is heard (also refer to
chapter 5.21.7 ).