Studer Vista 9 Скачать руководство пользователя страница 392 | Manualshive

Страница: 392 / 574

Studer Vista 9 Скачать руководство пользователя страница 392

Vista 9 Digital Mixing System

5-98 Au

Date printed: 28.0.0

SW V4.5

5.13.1.3 Loading Protection Sets

To make a Protection Set the current set, it must be Loaded unless it was the

last set used or saved.

Using the following procedure, previously created Protection Sets may be

loaded:

1.

Click the ‘Mix Protection Enabled’ button to open the ‘Automation Pro-

tection’ window if it is not already open.

2.

Click the ‘Load…’ button and a selection box containing the available

Protection Sets will be displayed. The current Protection Set will be dis-
played at the bottom of the box in the ‘Current Protection Set:’ field. The
current set will also be shown in blue in the Protection Set list. All others
will be in black.

3.

Double-click the desired Protection Set or click it and ‘Load’. The se-

lected set will become the current set and the selection box will close.

Note

Protection Sets cannot be loaded from other Titles. Protection Sets made
within a Title are only available to that Title. Protection Sets made within a
Title are available to all Mix Passes within that Title.

«
...
390
391
392
393
394
...
»

Содержание Vista 9































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов