Studer Vista 9, Руководство по эксплуатации, Страница: 453 / 574

Vista 9 Digital Mixing System
Au 5-59
Date printed: 28.0.0 SW V4.5
5.21.6 End o­f Pass
The End of Pass options determine the behavior of specific functions when a
Mix Pass is terminated by stopping timecode. At the end of a Mix Pass each
of the options control this behavior in the following manner.
End o­f Pass Clears <Record>: If any controls are in record when the mix pass is ended they will
be punched out of record if this option is set.
<Write To End>: Because Write To End is a very destructive feature (although
very much used and useful), this option ensures that it is only used for one
pass and Write to End Reverts to Punch-In at the end of a Record Pass. There
will be no effect by a play pass (which is the case with all of these options).
<Extend Back to Begin>: Like Write To End, this destructive function can be
set to be cleared after a Record pass has been written.
<Extend Back to Punch-In>: Same as above.
<Held Objects>: There are times when you want to hold objects (in record or
audition) and have them revert to playing the Read Mix data when the next
pass is run. And there are time when you want to audition a level and then
run the pass again to do the actual record pass. In this case, by un-checking
this option the controls can be held across passes.
<…Only if Touch Record Active>: When checked, End of Pass will clear the
items above only if Touch Record was active.