Studer Vista 9, Руководство по эксплуатации

Страница: 102 / 574

Vista 9 Digital Mixing System
3-4 Parameters
Date printed: 27.0.0
SW V4.5
3.3.7 Delay and insert Parameters
Press
GLOBAL VIEW: DLY-INS
.
This view enables the user to control the delay and insert parameters.
Please note: The two sections are activated with the
DELAY
and
INS
hardware
keys above the Vistonics
™
section.
For 5.1 channels the delay processing block has a maximum delay time of
700 ms (as opposed to the standard 240 or 100 ms delay in the mono or stereo
channels).
Delay Parameters: The delay value is set using the rotary encoder. It is displayed as a physical
distance (meters) and as a delay time (either samples or milli-seconds).
DELAY
On/Off is selected with the
DELAY
hardware key above the Vistonics
™
section.
DeLaY Rotary Delay time can be set in a range from 0 through 100 ms (or, depending on the
system configuration, to a maximum of 240 ms). The value is displayed as
a delay distance as well (from 0 cm up to 81.5 m, depending on the system
configuration).
DeLaY time/smpl Selects the delay setting in samples (‘smpl’ – fine setting) or milli-seconds
(‘time’ – coarse setting).