Studer Vista 9, Руководство по эксплуатации

Страница: 382 / 574

Vista 9 Digital Mixing System
5-88 Au
Date printed: 28.0.0 SW V4.5
Patch items may be updated in the same manner as any other Static control.
The following Channel Patch items have switches on the channel strip that
duplicate the Channel Patch functions:
• Input Selector
• Dynamic Sidechain Link Enable
• Dynamic Key Input Routing
The channel Meter location can be set globally using the controls in the
‘Meter/Generator’ item in the GC Options menu (not the Au Options
selector).
Item Behavio­r The Channel Patch does not have dedicated automation controls. The current
global automation modes apply to the Channel Patch.
The following Channel Patch items operate as Selectors:
• Input Selector
• Processor Block Order
• Dynamic Key Input Routing
• Direct Output Tap Location
• Meter Feed Tap Location
The SW (SWIT) preselectors are used to select global modes.
Press and Release Selecto­rs Some Channel Patch Selectors operate as Press and Release switches and
therefore follow Press and Release switch operation rules. Refer to
chapter
5.10.3.1 .
The following Channel Patch items operate as Press and Release Selectors:
• Input Selector
• Dynamic Key Input Routing
• Meter Feed Tap Location
No­te The channel Input Selector may be operated via the Channel Patch or by us-
ing the keys on the channel strip. Since input selection is controlled with a
Selector, Press and Hold operations are not possible.
One Sho­t Selecto­rs Other Channel Patch Selectors operate as ‘One Shot’ switches. One Shot
selectors operate as true momentary switches. The user has no control over
the duration of the held down state and release is immediate. A One Shot op-
eration produces both a Touch and a Un-touch event. In TOUCH RECORD,
when a One Shot switch is operated, punch-in and punch-out is almost im-
mediate. Under normal circumstances this could produce an audible glitch,
depending on the operation being completed. However, functions assigned
to One Shot Selectors will persist in their changed state after punch-out. All
Mix Pass ‘Write To:’ and ‘Extend Back To:’ conditions apply, except ‘Write
To : Punch Out.’
The following Channel Patch items operate as One Shot Selectors:
• Processor Block Order
• Direct Output Tap Location
These items follow the rules for One Shot Selectors as described above.