Studer Vista 9, Руководство по эксплуатации

Страница: 179 / 574

Vista 9 Digital Mixing System
GC Operation 4-9
Date printed: 28.0.0 SW V4.5
4.4.3.5 Set the Metering and Direct out Source Point
Set Metering Source Point: To set the Metering Source point in the selected channel’s audio path, click
on one of the three Meter boxes. The channel meter will now be sourced from
the selected point in the signal path.
Available points in the signal path are:
• After Input Block;
• After Fader & Mute;
• After Direct Out level control.
The Meter Source point is saved within Snapshots and Presets.
Note: There will only be two Meter Source points if Direct Outputs have not been
configured for the selected channel.
To set the Metering Source points for more channels at a time, use the Option
– Meter/Generator menu (refer to chapter 4.6.4.1 ).
Set Direct Output source Point: If a Direct Output is included in a channel’s configuration, it can be fed from
one of three points in the audio path. To set the Direct Output source point,
click on one of the three ‘wires’ connected to the Dir Box (the current con-
nection will be shown
solid
, while the two possible connections are displayed
as dotted lines).
The Direct Out will now be fed from the selected point in the signal path.
Available points in the signal path are:
• After Input Block;
• Pre Fader & Mute;
• After Fader & Mute.
The selected Direct Output source points are saved within Snapshots and
Presets.
 Tip If you have changed the order of the processing blocks, note that the Meter
and Direct Out source points will move together with the processing blocks to
which they are attached (except the Input Block, which cannot be moved).
4.4.3.6 Switch off the label inheritance
The Desk Label displays will show Source Labels (from the General Patch)
if the console is set to Inherited Label mode and if a source is patched in
to the channel. If you wish to remain in Inherited Mode, but do not wish
to see Source Labels for certain channels, check the Defeat Source Label
Inheritance box. The Desk Label display will now show the
name of the
channel rather than the Source Label, assuming the User Label on the
Channel Patch has not been changed from the default. If the User Label has
been changed on the Channel Patch screen, the Desk Labels will display
this User Label when the Defeat Source Label Inheritance box has been
checked. User Labels entered on the Channel Patch screen are saved with
Snapshots and Presets.