Studer Vista 9, Руководство по эксплуатации

Страница: 351 / 574

Vista 9 Digital Mixing System
Au 5-5
Date printed: 28.0.0 SW V4.5
To­uch Reco­rd + To­uch Ho­ld With both
TOUCH RECORD
and
TOUCH HOLD
engaged, Touch events perform
the following functions when dynamic controls are in the Control Modes
indicated (remember Un-touch events are suppressed):
• READ: Touch will change to and stay in AUDITION.
• WRITE ENABLE: Touch will change the control from WRITE ENABLE
to WRITE RECORD and stay in WRITE RECORD when released.
• TRIM ENABLE: Touch will change the control from TRIM ENABLE to
TRIM RECORD and stay in TRIM RECORD when released.
• ISOLATE: Touch/Un-touch events of Isolated controls are not recognized
by Au.
<Optio­n> • With <Read Safe> checked on the Misc Options page (see chapter 5.21.7 ),
AUDITION mode is defeated for controls in READ, and only written
values will be heard.
• The Master Panel
TOUCH RECORD
and
TOUCH HOLD
keys may be over-
ridden by checking options on the <Master Panel Overrides> section of
the Master Panel Options page (see
chapter 5.21.5 ). Faders and Encoders
can have
TOUCH RECORD
and
TOUCH HOLD
set to <ON>, <OFF>, or to
follow the Master Panel <Follows Panel>.
TOUCH RECORD
and
TOUCH
HOLD
for Switches can also have <ON> and <OFF> overrides or be set to
follow the Master Panel <Follows Panel>
• The Un-touch function of either
TOUCH RECORD
or
TOUCH HOLD
may
be changed by using the
AUTO MODE
modifier key. For details, refer to
chapter 5.7.6 .
5.7.5 Held Controls
A control that is touched with
TOUCH HOLD
engaged becomes a ‘held’ con-
trol. Held controls are also known as ‘Held Objects.’ Controls that are held
not only stay in their Touched mode when released, they are identified by the
system as being held.
Held Co­ntro­ls Buffer As controls are placed into a held status, they are added to a list of controls
stored in the ‘Held Controls Buffer.’ The
CLR HELD
key in the
HELD
section
of the Au Panel will light if one or more control is held.
The Held Controls list is used as a filter for the
HELD
preselectors in the
Control Modes and Global Record sections of the Automation Panel.
Clearing Held Co­ntro­ls Clear Held Controls Buffer: Pressing the
CLR HELD
key will take all Held
controls out of Hold. It will also clear the list of controls in the Held Controls
Buffer.
Clear Held Controls Modes: Controls may be taken out of hold in the fol-
lowing ways:
• When
TOUCH HOLD
is turned OFF <Optio­n>
• Upon Punch-Out <Optio­n>
• At the end of a Mix Pass <Optio­n>
<Optio­n> • With <When Touch Hold Turned Off> checked in the <Clear Held Objects>
section of the Hold Options page (also refer to chapter 5.21.4 ), all held
controls are cleared when
TOUCH HOLD
is turned Off.
• With <Upon Punch-Out> checked in the <Clear Held Objects> section of
the Hold Options page, any Held control is cleared upon punch-out.
• With <Held Objects> checked in the <End of Pass Clears> section of the
End of Pass Options page, all held controls are cleared at the end of each
Mix Pass.