34
www.stryker.com
EN
0703-001-700 Rev-C
8.2.2.2 To Prepare for Smoke Evacuation
NOTES:
▪ Make sure a smoke evacuator filter is installed
in the rover before using smoke evacuation. See
Section 5.3 For Use With
. See the
instructions for use
supplied with the smoke evacuator filter for installation
information.
▪ The smoke evacuator tubing and optional smoke
evacuator attachment are applied parts. See
Section
17 Glossary
for the definition of applied part
.
1. Install the smoke evacuator tubing to the smoke
evacuator filter (Figure 28).
2. Install a smoke evacuator attachment to the end of the
smoke tubing, if desired.
3. Adjust smoke evacuator power as required. See
Section 8.1.3.4 To Test Smoke Evacuation
.
Figure 28 – To Prepare for Smoke Evacuation
8.2.2.3 To Prepare the IV Pole
NOTE:
The powered IV pole will return to its lowest
position automatically when power is removed from the
rover.
1. Hang only one fluid bag per IV pole hook, if required
(Figure 29). The maximum volume allowed on each IV
pole hook is 3000 mL.
2. From the control screen menu, touch and hold the IV
pole UP arrow button to raise the fluid bag(s) to the
desired height.
Figure 29 – To Use the Powered IV Pole
0000160552, Rev. C Effective Date: Nov 25, 2015 1:43:15 PM
Print Date: Nov 25, 2015 02:19:13 PM
