Stryker 0703-001-000 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 63

background image

28

www.stryker.com

EN

0703-001-700 Rev-C

8 Instructions

8.1 Before First Use

8.1.1 To Unpack the Rover

WARNINGS:

▪

LIFT HAZARD:

ALWAYS have more than one person

unpack and remove this equipment from the shipping
pallet. See

Section 14 Specifications

for rover weight.

Failure to comply may result in personal injury.

▪ Upon initial receipt, inspect each component for

damage. DO NOT use any equipment if damage is
apparent or the inspection criteria are not met. See

Table 19 Inspection Schedule and Criteria

.

1. Remove the exterior packaging materials from the

rover and recycle the material as required.

2. Using at least two people, remove the rover from the

shipping pallet.

3. Inspect the rover and components for damage. If

damage is apparent, DO NOT use the equipment.

4. Make sure all of the components are provided.

See

Table 13 Components Supplied with Rover

. If

any component is missing, see

Section 1.3 Contact

Information

.

Table 13 – Components Supplied with Rover

COMPONENTS

REF

Symbol Definition Chart

0036-716-000

Fluid Suction HEPA Filter

0702-034-000

Power Cord

0703-001-001

Instructions For Use (IFU)

0703-001-700

Neptune 3 Software License
Addendum

0703-001-701

Docking Station Instructional Poster

9100-003-353

8.1.2 To Add Canister Prefill Fluid

NOTE:

Before the rover may be tested and placed into

use, initial docking is required. Initial docking will add
prefill fluid to the canisters. See

Section 8.4.3 To Dock

the Rover

. Failure to comply will result in prefill errors and

prevent the rover from operating properly. See

Section 17

Glossary

for definition of prefill fluid.

8.1.3 To Test the Rover

8.1.3.1 To Connect Power to the Rover

1. Connect the rover to facility electrical power using

the supplied power cord. Insert the plug of the power
cord through the strain relief hole before connecting
the power cord to the rover (Figure 18). The power
cord plug has a latched release button to prevent
unintended removal from the rover power receptacle.

2. Push the power switch to the ON position.

3. Read the safety information on the control screen, then

touch the CONFIRM button.

Figure 18 – To Connect Power

8.1.3.2 To Test Fluid Suction

NOTES:

▪ A SET UP SYSTEM screen will appear (Figure 19)

after confirmation of the safety information (Figure 11).
A valid manifold must be installed into the manifold
receptacle to enable suction control.

▪ If the manifold is valid and installed correctly, a ‘task

complete’ audible indicator will occur, the manifold
suction indicator will illuminate white or pink, and the
START SUCTION button will be enabled.

0000160552, Rev. C Effective Date: Nov 25, 2015 1:43:15 PM

Print Date: Nov 25, 2015 02:19:13 PM

«
...
27
28
29
30
31
...
»

Содержание 0703-001-000
































































Отзывы:

Нет отзывов

Похожие инструкции для 0703-001-000

Бренд: A.O. Smith Страницы: 24

Zoneline AZ85H09DAC

Бренд: GE Страницы: 2

Бренд: GE Страницы: 2

Aquarea WH-MDF06E3E5 series

Бренд: Panasonic Страницы: 36

Бренд: Parker Страницы: 12

Бренд: Walrus Страницы: 3

Бренд: Walrus Страницы: 5

VRV IV-S Series

Бренд: Daikin Страницы: 536

Бренд: Daikin Страницы: 226

Бренд: Osram Страницы: 8

Бренд: OLIJU Страницы: 28

Бренд: Rowi Страницы: 40

Бренд: KISANKRAFT Страницы: 44

Бренд: Sam Страницы: 23

Powerflex PDVG-40T42

Бренд: American Water Heater Страницы: 4

Бренд: T.I.P. Страницы: 104

SBC 1100 ADV PLUS FR

Бренд: Quick Страницы: 76

Бренд: hajdu Страницы: 132

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды